플러그인을 사용하지 않고 jQuery 기능을 완화
jQuery와 함께 사용할 수 있는 사용자 지정 완화 기능의 온라인 목록을 찾고 있습니다.
저는 플러그인을 사용하는 것에 관심이 없고 jQuery UI도 사용하지 않습니다.
아래에서 약간의 바운스를 할 수 있는 것을 찾았지만 몇 가지 옵션을 가질 수 있도록 다른 것을 찾고 있습니다.
다른 기능들 대신에, 이것이 어떻게 작동하고 수정될 수 있는지에 대한 간단한 설명은 정말 멋질 것입니다.감사합니다!
예:
$.easing.custom = function (x, t, b, c, d) {
var s = 1.70158;
if ((t/=d/2) < 1) return c/2*(t*t*(((s*=(1.525))+1)*t - s)) + b;
return c/2*((t-=2)*t*(((s*=(1.525))+1)*t + s) + 2) + b;
}
편집 #1:
다음은 모든 jQuery UI easy 기능의 온라인 데모입니다.Jake가 정답으로 아래에 UI의 소스 기능을 게시합니다.
http://api.jqueryui.com/easings/
편집 #2:
위에 올린 예시 완화 기능이 jQuery UI의 "easeInOutBack"과 정확히 일치하는 것으로 확인되었습니다.
편집 #3:
여기 다운로드 시 무료로 사용할 수 있는 독립형 완화 방정식이 있습니다.
http://www.robertpenner.com/easing/
BSD 라이선스 조항을 따른다면 jQuery UI 소스 코드에서 직접 원하는 완화 기능을 체리 선택할 수 있습니다.이러한 기능 중 일부는 목록 내의 다른 기능에 따라 달라집니다.
이러한 완화 기능을 실제로 보고 비교하려면 http://api.jqueryui.com/easings/ 을 참조하십시오.
/*
* jQuery Easing v1.3 - http://gsgd.co.uk/sandbox/jquery/easing/
*
* Uses the built in easing capabilities added In jQuery 1.1
* to offer multiple easing options
*
* TERMS OF USE - jQuery Easing
*
* Open source under the BSD License.
*
* Copyright 2008 George McGinley Smith
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
*
* Redistributions of source code must retain the above copyright notice, this list of
* conditions and the following disclaimer.
* Redistributions in binary form must reproduce the above copyright notice, this list
* of conditions and the following disclaimer in the documentation and/or other materials
* provided with the distribution.
*
* Neither the name of the author nor the names of contributors may be used to endorse
* or promote products derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
* EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
* GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
* OF THE POSSIBILITY OF SUCH DAMAGE.
*
*/
// t: current time, b: begInnIng value, c: change In value, d: duration
$.easing.jswing = $.easing.swing;
$.extend($.easing,
{
def: 'easeOutQuad',
swing: function (x, t, b, c, d) {
//alert($.easing.default);
return $.easing[$.easing.def](x, t, b, c, d);
},
easeInQuad: function (x, t, b, c, d) {
return c*(t/=d)*t + b;
},
easeOutQuad: function (x, t, b, c, d) {
return -c *(t/=d)*(t-2) + b;
},
easeInOutQuad: function (x, t, b, c, d) {
if ((t/=d/2) < 1) return c/2*t*t + b;
return -c/2 * ((--t)*(t-2) - 1) + b;
},
easeInCubic: function (x, t, b, c, d) {
return c*(t/=d)*t*t + b;
},
easeOutCubic: function (x, t, b, c, d) {
return c*((t=t/d-1)*t*t + 1) + b;
},
easeInOutCubic: function (x, t, b, c, d) {
if ((t/=d/2) < 1) return c/2*t*t*t + b;
return c/2*((t-=2)*t*t + 2) + b;
},
easeInQuart: function (x, t, b, c, d) {
return c*(t/=d)*t*t*t + b;
},
easeOutQuart: function (x, t, b, c, d) {
return -c * ((t=t/d-1)*t*t*t - 1) + b;
},
easeInOutQuart: function (x, t, b, c, d) {
if ((t/=d/2) < 1) return c/2*t*t*t*t + b;
return -c/2 * ((t-=2)*t*t*t - 2) + b;
},
easeInQuint: function (x, t, b, c, d) {
return c*(t/=d)*t*t*t*t + b;
},
easeOutQuint: function (x, t, b, c, d) {
return c*((t=t/d-1)*t*t*t*t + 1) + b;
},
easeInOutQuint: function (x, t, b, c, d) {
if ((t/=d/2) < 1) return c/2*t*t*t*t*t + b;
return c/2*((t-=2)*t*t*t*t + 2) + b;
},
easeInSine: function (x, t, b, c, d) {
return -c * Math.cos(t/d * (Math.PI/2)) + c + b;
},
easeOutSine: function (x, t, b, c, d) {
return c * Math.sin(t/d * (Math.PI/2)) + b;
},
easeInOutSine: function (x, t, b, c, d) {
return -c/2 * (Math.cos(Math.PI*t/d) - 1) + b;
},
easeInExpo: function (x, t, b, c, d) {
return (t==0) ? b : c * Math.pow(2, 10 * (t/d - 1)) + b;
},
easeOutExpo: function (x, t, b, c, d) {
return (t==d) ? b+c : c * (-Math.pow(2, -10 * t/d) + 1) + b;
},
easeInOutExpo: function (x, t, b, c, d) {
if (t==0) return b;
if (t==d) return b+c;
if ((t/=d/2) < 1) return c/2 * Math.pow(2, 10 * (t - 1)) + b;
return c/2 * (-Math.pow(2, -10 * --t) + 2) + b;
},
easeInCirc: function (x, t, b, c, d) {
return -c * (Math.sqrt(1 - (t/=d)*t) - 1) + b;
},
easeOutCirc: function (x, t, b, c, d) {
return c * Math.sqrt(1 - (t=t/d-1)*t) + b;
},
easeInOutCirc: function (x, t, b, c, d) {
if ((t/=d/2) < 1) return -c/2 * (Math.sqrt(1 - t*t) - 1) + b;
return c/2 * (Math.sqrt(1 - (t-=2)*t) + 1) + b;
},
easeInElastic: function (x, t, b, c, d) {
var s=1.70158;var p=0;var a=c;
if (t==0) return b; if ((t/=d)==1) return b+c; if (!p) p=d*.3;
if (a < Math.abs(c)) { a=c; var s=p/4; }
else var s = p/(2*Math.PI) * Math.asin (c/a);
return -(a*Math.pow(2,10*(t-=1)) * Math.sin( (t*d-s)*(2*Math.PI)/p )) + b;
},
easeOutElastic: function (x, t, b, c, d) {
var s=1.70158;var p=0;var a=c;
if (t==0) return b; if ((t/=d)==1) return b+c; if (!p) p=d*.3;
if (a < Math.abs(c)) { a=c; var s=p/4; }
else var s = p/(2*Math.PI) * Math.asin (c/a);
return a*Math.pow(2,-10*t) * Math.sin( (t*d-s)*(2*Math.PI)/p ) + c + b;
},
easeInOutElastic: function (x, t, b, c, d) {
var s=1.70158;var p=0;var a=c;
if (t==0) return b; if ((t/=d/2)==2) return b+c; if (!p) p=d*(.3*1.5);
if (a < Math.abs(c)) { a=c; var s=p/4; }
else var s = p/(2*Math.PI) * Math.asin (c/a);
if (t < 1) return -.5*(a*Math.pow(2,10*(t-=1)) * Math.sin( (t*d-s)*(2*Math.PI)/p )) + b;
return a*Math.pow(2,-10*(t-=1)) * Math.sin( (t*d-s)*(2*Math.PI)/p )*.5 + c + b;
},
easeInBack: function (x, t, b, c, d, s) {
if (s == undefined) s = 1.70158;
return c*(t/=d)*t*((s+1)*t - s) + b;
},
easeOutBack: function (x, t, b, c, d, s) {
if (s == undefined) s = 1.70158;
return c*((t=t/d-1)*t*((s+1)*t + s) + 1) + b;
},
easeInOutBack: function (x, t, b, c, d, s) {
if (s == undefined) s = 1.70158;
if ((t/=d/2) < 1) return c/2*(t*t*(((s*=(1.525))+1)*t - s)) + b;
return c/2*((t-=2)*t*(((s*=(1.525))+1)*t + s) + 2) + b;
},
easeInBounce: function (x, t, b, c, d) {
return c - $.easing.easeOutBounce (x, d-t, 0, c, d) + b;
},
easeOutBounce: function (x, t, b, c, d) {
if ((t/=d) < (1/2.75)) {
return c*(7.5625*t*t) + b;
} else if (t < (2/2.75)) {
return c*(7.5625*(t-=(1.5/2.75))*t + .75) + b;
} else if (t < (2.5/2.75)) {
return c*(7.5625*(t-=(2.25/2.75))*t + .9375) + b;
} else {
return c*(7.5625*(t-=(2.625/2.75))*t + .984375) + b;
}
},
easeInOutBounce: function (x, t, b, c, d) {
if (t < d/2) return $.easing.easeInBounce (x, t*2, 0, c, d) * .5 + b;
return $.easing.easeOutBounce (x, t*2-d, 0, c, d) * .5 + c*.5 + b;
}
});
/*
*
* TERMS OF USE - EASING EQUATIONS
*
* Open source under the BSD License.
*
* Copyright 2001 Robert Penner
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
*
* Redistributions of source code must retain the above copyright notice, this list of
* conditions and the following disclaimer.
* Redistributions in binary form must reproduce the above copyright notice, this list
* of conditions and the following disclaimer in the documentation and/or other materials
* provided with the distribution.
*
* Neither the name of the author nor the names of contributors may be used to endorse
* or promote products derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
* EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
* GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
* OF THE POSSIBILITY OF SUCH DAMAGE.
*
*/
용도:
$('#clickedDIV').animate({
marginLeft : '90%'
},800,'easeInOutExpo');
javascript 파일 하단에 정확히 있는 그대로 다음 내용을 붙여 넣습니다.그런 다음 위와 같이 jQueryUI가 설치된 것처럼 사용합니다.
jQuery.easing['jswing'] = jQuery.easing['swing'];
jQuery.extend( jQuery.easing,
{
def: 'easeOutQuad',
swing: function (x, t, b, c, d) {
//alert(jQuery.easing.default);
return jQuery.easing[jQuery.easing.def](x, t, b, c, d);
},
easeInQuad: function (x, t, b, c, d) {
return c*(t/=d)*t + b;
},
easeOutQuad: function (x, t, b, c, d) {
return -c *(t/=d)*(t-2) + b;
},
easeInOutQuad: function (x, t, b, c, d) {
if ((t/=d/2) < 1) return c/2*t*t + b;
return -c/2 * ((--t)*(t-2) - 1) + b;
},
easeInCubic: function (x, t, b, c, d) {
return c*(t/=d)*t*t + b;
},
easeOutCubic: function (x, t, b, c, d) {
return c*((t=t/d-1)*t*t + 1) + b;
},
easeInOutCubic: function (x, t, b, c, d) {
if ((t/=d/2) < 1) return c/2*t*t*t + b;
return c/2*((t-=2)*t*t + 2) + b;
},
easeInQuart: function (x, t, b, c, d) {
return c*(t/=d)*t*t*t + b;
},
easeOutQuart: function (x, t, b, c, d) {
return -c * ((t=t/d-1)*t*t*t - 1) + b;
},
easeInOutQuart: function (x, t, b, c, d) {
if ((t/=d/2) < 1) return c/2*t*t*t*t + b;
return -c/2 * ((t-=2)*t*t*t - 2) + b;
},
easeInQuint: function (x, t, b, c, d) {
return c*(t/=d)*t*t*t*t + b;
},
easeOutQuint: function (x, t, b, c, d) {
return c*((t=t/d-1)*t*t*t*t + 1) + b;
},
easeInOutQuint: function (x, t, b, c, d) {
if ((t/=d/2) < 1) return c/2*t*t*t*t*t + b;
return c/2*((t-=2)*t*t*t*t + 2) + b;
},
easeInSine: function (x, t, b, c, d) {
return -c * Math.cos(t/d * (Math.PI/2)) + c + b;
},
easeOutSine: function (x, t, b, c, d) {
return c * Math.sin(t/d * (Math.PI/2)) + b;
},
easeInOutSine: function (x, t, b, c, d) {
return -c/2 * (Math.cos(Math.PI*t/d) - 1) + b;
},
easeInExpo: function (x, t, b, c, d) {
return (t==0) ? b : c * Math.pow(2, 10 * (t/d - 1)) + b;
},
easeOutExpo: function (x, t, b, c, d) {
return (t==d) ? b+c : c * (-Math.pow(2, -10 * t/d) + 1) + b;
},
easeInOutExpo: function (x, t, b, c, d) {
if (t==0) return b;
if (t==d) return b+c;
if ((t/=d/2) < 1) return c/2 * Math.pow(2, 10 * (t - 1)) + b;
return c/2 * (-Math.pow(2, -10 * --t) + 2) + b;
},
easeInCirc: function (x, t, b, c, d) {
return -c * (Math.sqrt(1 - (t/=d)*t) - 1) + b;
},
easeOutCirc: function (x, t, b, c, d) {
return c * Math.sqrt(1 - (t=t/d-1)*t) + b;
},
easeInOutCirc: function (x, t, b, c, d) {
if ((t/=d/2) < 1) return -c/2 * (Math.sqrt(1 - t*t) - 1) + b;
return c/2 * (Math.sqrt(1 - (t-=2)*t) + 1) + b;
},
easeInElastic: function (x, t, b, c, d) {
var s=1.70158;var p=0;var a=c;
if (t==0) return b; if ((t/=d)==1) return b+c; if (!p) p=d*.3;
if (a < Math.abs(c)) { a=c; var s=p/4; }
else var s = p/(2*Math.PI) * Math.asin (c/a);
return -(a*Math.pow(2,10*(t-=1)) * Math.sin( (t*d-s)*(2*Math.PI)/p )) + b;
},
easeOutElastic: function (x, t, b, c, d) {
var s=1.70158;var p=0;var a=c;
if (t==0) return b; if ((t/=d)==1) return b+c; if (!p) p=d*.3;
if (a < Math.abs(c)) { a=c; var s=p/4; }
else var s = p/(2*Math.PI) * Math.asin (c/a);
return a*Math.pow(2,-10*t) * Math.sin( (t*d-s)*(2*Math.PI)/p ) + c + b;
},
easeInOutElastic: function (x, t, b, c, d) {
var s=1.70158;var p=0;var a=c;
if (t==0) return b; if ((t/=d/2)==2) return b+c; if (!p) p=d*(.3*1.5);
if (a < Math.abs(c)) { a=c; var s=p/4; }
else var s = p/(2*Math.PI) * Math.asin (c/a);
if (t < 1) return -.5*(a*Math.pow(2,10*(t-=1)) * Math.sin( (t*d-s)*(2*Math.PI)/p )) + b;
return a*Math.pow(2,-10*(t-=1)) * Math.sin( (t*d-s)*(2*Math.PI)/p )*.5 + c + b;
},
easeInBack: function (x, t, b, c, d, s) {
if (s == undefined) s = 1.70158;
return c*(t/=d)*t*((s+1)*t - s) + b;
},
easeOutBack: function (x, t, b, c, d, s) {
if (s == undefined) s = 1.70158;
return c*((t=t/d-1)*t*((s+1)*t + s) + 1) + b;
},
easeInOutBack: function (x, t, b, c, d, s) {
if (s == undefined) s = 1.70158;
if ((t/=d/2) < 1) return c/2*(t*t*(((s*=(1.525))+1)*t - s)) + b;
return c/2*((t-=2)*t*(((s*=(1.525))+1)*t + s) + 2) + b;
},
easeInBounce: function (x, t, b, c, d) {
return c - jQuery.easing.easeOutBounce (x, d-t, 0, c, d) + b;
},
easeOutBounce: function (x, t, b, c, d) {
if ((t/=d) < (1/2.75)) {
return c*(7.5625*t*t) + b;
} else if (t < (2/2.75)) {
return c*(7.5625*(t-=(1.5/2.75))*t + .75) + b;
} else if (t < (2.5/2.75)) {
return c*(7.5625*(t-=(2.25/2.75))*t + .9375) + b;
} else {
return c*(7.5625*(t-=(2.625/2.75))*t + .984375) + b;
}
},
easeInOutBounce: function (x, t, b, c, d) {
if (t < d/2) return jQuery.easing.easeInBounce (x, t*2, 0, c, d) * .5 + b;
return jQuery.easing.easeOutBounce (x, t*2-d, 0, c, d) * .5 + c*.5 + b;
}
});
출처:
http://gsgd.co.uk/sandbox/jquery/easing/
웹팩과 같은 패키지를 사용하여 서버가 렌더링한 자산을 번들로 제공하는 모든 사람들에게, 나는 다음과 같은 일을 당했습니다.Error: TypeError: _jquery2.default.extend is not a function오류(참조).저는 이 문제를 해결할 수 있었습니다.Object.assign()대신에$.extend:
import $ from 'jquery'
// Extend jQuery easings with easeOutCubic
$.easing = Object.assign({}, $.easing, {
easeOutCubic: (x, t, b, c, d) => {
return c * ((t = t / d - 1) * t * t + 1) + b
},
})
맞춤형 베젤 완화 기능을 만들 수 있는 jquery(http://github.com/rdallasgray/bez )용 베젤 플러그인이 있습니다.
4가지 매개변수를 만지작거리고 싶다면 원하는 매개변수를 쉽게 얻을 수 있는 온라인 도구가 있습니다. http://cubic-bezier.com
코드는 이렇습니다.
/*!
* Bez @VERSION
* http://github.com/rdallasgray/bez
*
* A plugin to convert CSS3 cubic-bezier co-ordinates to jQuery-compatible easing functions
*
* With thanks to Nikolay Nemshilov for clarification on the cubic-bezier maths
* See http://st-on-it.blogspot.com/2011/05/calculating-cubic-bezier-function.html
*
* Copyright @YEAR Robert Dallas Gray. All rights reserved.
* Provided under the FreeBSD license: https://github.com/rdallasgray/bez/blob/master/LICENSE.txt
*/
jQuery.extend({ bez: function(coOrdArray) {
var encodedFuncName = "bez_" + jQuery.makeArray(arguments).join("_").replace(/\./g, "p");
if (typeof jQuery.easing[encodedFuncName] !== "function") {
var polyBez = function(p1, p2) {
var A = [null, null], B = [null, null], C = [null, null],
bezCoOrd = function(t, ax) {
C[ax] = 3 * p1[ax], B[ax] = 3 * (p2[ax] - p1[ax]) - C[ax], A[ax] = 1 - C[ax] - B[ax];
return t * (C[ax] + t * (B[ax] + t * A[ax]));
},
xDeriv = function(t) {
return C[0] + t * (2 * B[0] + 3 * A[0] * t);
},
xForT = function(t) {
var x = t, i = 0, z;
while (++i < 14) {
z = bezCoOrd(x, 0) - t;
if (Math.abs(z) < 1e-3) break;
x -= z / xDeriv(x);
}
return x;
};
return function(t) {
return bezCoOrd(xForT(t), 1);
}
};
jQuery.easing[encodedFuncName] = function(x, t, b, c, d) {
return c * polyBez([coOrdArray[0], coOrdArray[1]], [coOrdArray[2], coOrdArray[3]])(t/d) + b;
}
}
return encodedFuncName;
}});
언급URL : https://stackoverflow.com/questions/5207301/jquery-easing-functions-without-using-a-plugin
'programing' 카테고리의 다른 글
| jQuery javascript regex ReplacejQuery javascript regex Replace\n과 함께\n과 함께 (0) | 2023.10.28 |
|---|---|
| WooCommerce 체크아웃 페이지의 카트 합계에 ajax를 사용한 사용자 지정 수수료 추가 (0) | 2023.10.28 |
| 지정된 주소 gdb에서 찾은 표시 값 (0) | 2023.10.28 |
| 파워셸에서 생성할 수 있는 COM 개체를 모두 어디서 찾을 수 있습니까? (0) | 2023.10.28 |
| CSS3 또는 jQuery에서 요소의 너비를 0~100%로 애니메이션화하고 미리 설정된 너비 없이 필요한 너비만큼만 래퍼를 만듭니다. (0) | 2023.10.23 |